Retraction
Experimental Study on Surface Roughness and Flank Wear in Turning of Nimonic C263 under Dry Cutting Conditions
Paper Information
Record ID:
49914
Journal:
Publication Date:
October 12, 2021
Retraction Date:
July 12, 2023
(2.4 years years ago)
Subjects:
Institutions:
- School of Mechanical Engineering, VIT Bhopal University, Bhopal, India
- Department of Mechanical Engineering, Swarna Bharathi Institute of Science and Technology Khammam, Telangana, India
- Department of Mechanical Engineering, Sriram Engineering College, Chennai, India
- Center for Materials Research, Chennai Institute of Technology, Chennai, India
- Department of Mechanical Engineering, Prathyusha Engineering College, Chennai, India
- Department of Mechanical Engineering, College of Electrical and Mechanical Engineering, Addis Ababa Science and Technology University, Addis Ababa, Ethiopia
Countries:
Article Type:
Publisher:
Hindawi
Open Access:
Yes
DOI:
PubMed ID:
Not indexed in PubMed
Retraction PubMed ID:
Not indexed in PubMed
Retraction Details
Retraction Reasons:
- Concerns/Issues About Data
- Concerns/Issues about Results and/or Conclusions
- Concerns/Issues about Referencing/Attributions
- Concerns/Issues with Peer Review
- Investigation by Journal/Publisher
- Investigation by Third Party
- Computer-Aided Content or Computer-Generated Content
- Unreliable Results and/or Conclusions
Nature of Retraction:
Retraction
Retraction Notice:
10.1155/2023/9789243Citations (23)
23
Total Citations12
Post-Retraction(52.2%)
10
Pre-Retraction1
Same DayPost-Retraction Citation Analysis
1
Within 30 days
9
Within 1 year
0
After 2+ years
566
Days since retraction (latest)
Microstructure and Strength of Zinc-Molybdenum Steel Joints Brazed with Nickel-Chromium-Zinc Filler Metal
B Ashok Kumar Babu Chellam, M. Vimal Raja, J. Dhiyaneswaran et al. (5 authors)
SAE technical papers on CD-ROM/SAE technical paper series
Published: Jan 2025
566 days after retraction
Polyethylene Sheet Dispersion and Optical Constant Changes Due to Electron Beam Irradiation
Nitish Kaushik, Ch Sandeep, Vijay Srinivasan et al. (6 authors)
SAE technical papers on CD-ROM/SAE technical paper series
Published: Dec 2024
517 days after retraction
The Application of a Chemical Inhibitor in an Effort to Prevent the Scaling of Ferrous Carbide
Ch Sandeep, Vijay Srinivasan, G. Raja Kumar et al. (6 authors)
SAE technical papers on CD-ROM/SAE technical paper series
Published: Dec 2024
517 days after retraction
FlankPix: An Image Segmentation Algorithm for Flank Wear Analysis in Monel K500 Turning
Vedagiri Dilli Ganesh, Rammohan Bommi
Traitement du signal
Open Access
Published: Jun 2024
350 days after retraction
The Impacts of Fly Ash Particles on the Zinc Aluminum Casting Alloy and Its Mechanical Properties
S. Dinesh Krishnaa, M. Pandiyan, R. Ben Ruben et al. (5 authors)
SAE technical papers on CD-ROM/SAE technical paper series
Published: Feb 2024
226 days after retraction
The Determination of the Stress Field Surrounding a Quasi-Constrained Inclusion in a Chromium-3.5nickel Alloy
B. Ashok Kumar, M. Vimal Raja, V.L. Vel Prakhash et al. (5 authors)
SAE technical papers on CD-ROM/SAE technical paper series
Published: Feb 2024
226 days after retraction
An Examination of the Friction and Wear Characteristics of Carburized, Boronized, and Austenitic 1080 and 1566 Steel
Vijay Srinivasan, B. A. Saravanan, C. Shanthi et al. (6 authors)
SAE technical papers on CD-ROM/SAE technical paper series
Published: Feb 2024
226 days after retraction
Analysis of Cast Aluminium-Zinc Alloy Surface Fatigue Crack Formation Growth Characteristics
Ch Sandeep, L. Selvarajan, S. Balu Mahandiran et al. (6 authors)
SAE technical papers on CD-ROM/SAE technical paper series
Published: Feb 2024
226 days after retraction
Optimization of the tool wear and surface roughness in the high-speed dry turning of Inconel 800
Ganesha Prasad, G S Vijay, Raghavendra C. Kamath et al. (4 authors)
Cogent Engineering
Open Access
Published: Feb 2024
8 citations
8 citations
205 days after retraction
Mathematical modeling and optimization of machining parameters in CNC turning process of Inconel 718 using the Taguchi method
Fatlume Zhujani, Georgi Todorov, Konstantin Kamberov et al. (4 authors)
Journal of Engineering Research
Open Access
Published: Oct 2023
12 citations
12 citations
81 days after retraction
Determining Average Error of Flank Wear in Turning Duplex Stainless Steel Using Canny's Edge Detection Algorithm in Comparison with Fuzzy Logic Algorithm
S. Senthil Pon Vignesh, R. M. Bommi
Unknown Journal
Published: Sep 2023
64 days after retraction
Multi-Objective Optimization of Micro-Milling Titanium Alloy Ti-3Al-2.5V (Grade 9) Using Taguchi-Grey Relation Integrated Approach
Muhammad Ayyaz Khan, Syed Husain Imran Jaffery, Muhammad Ali Khan et al. (5 authors)
Metals
Open Access
Published: Jul 2023
8 citations
8 citations
19 days after retraction
Retracted: Experimental Study on Surface Roughness and Flank Wear in Turning of Nimonic C263 under Dry Cutting Conditions
Journal of Nanomaterials
Journal of Nanomaterials
Open Access
Published: Jul 2023
Same day as retraction
Application of EDAS method in parametric optimization of vertical milling operation on Al 6063
Partha Protim Das
AIP conference proceedings
Published: Jan 2023
1 citation
1 citation
192 days before retraction
A review on conventional and nonconventional machining of Nickel-based Nimonic superalloy
Ganesha Prasad, Raghavendra C. Kamath, V. Srinivas
Manufacturing Review
Open Access
Published: Jan 2023
2 citations
2 citations
192 days before retraction
Carburization effect on mechanical properties of EN-12 steel in different quenching medium at different quenching time intervals
M. Natarajan, K. Rameshkumar, D. Vijayakumar et al. (6 authors)
AIP conference proceedings
Published: Jan 2023
192 days before retraction
A study on mechanical properties of heat treated Fe-Ag-Al alloys
S. Kaliappan, K. Muralidharan, M. Natarajan et al. (6 authors)
AIP conference proceedings
Published: Jan 2023
192 days before retraction
Experimental Analysis on Machining Properties in Turning of Nimonic C-263
Muhammad Ikhwan Roslim, Mohamad Ridzuan Jamli, Al Emran Ismail et al. (4 authors)
International Journal of Engineering Trends and Technology
Open Access
Published: Oct 2022
255 days before retraction
Effect of End Milling Process Parameters and Corrosion Behaviour of ZE41A Magnesium Alloy using Taguchi Based GRA
Rajender Kumar, Puneet Katyal, Kamal Kumar
Biointerface Research in Applied Chemistry
Open Access
Published: Jun 2022
8 citations
8 citations
402 days before retraction
Estimation of Flank Wear in Turning of Nimonic C263 Super Alloy Based on Novel MSER Algorithm and Deep Patten Network
R. M. Bommi, C. Ezilarasan, M. P. Sudeshkumar et al. (4 authors)
Russian Journal of Nondestructive Testing
Published: Feb 2022
13 citations
13 citations
526 days before retraction
Analyze the Effect of Crater Cutting Tool Wear Modeling in the Machining of Aluminium Composite
Nagendra Gandhi Nagarajan, R. Kamalakannan
Materials Research
Open Access
Published: Jan 2022
3 citations
3 citations
557 days before retraction
Multiple response optimization of machining parameters in turning nimonic C263 using TOPSIS approach
S. Lakshmana Kumar, M. Subburaj, Arul Kulandaivel et al. (6 authors)
Materials Today Proceedings
Published: Dec 2021
4 citations
4 citations
565 days before retraction
Comparison of Sugeno-type and Mamdani-type fuzzy inference systems for end milling process
N. Tamiloli, J. Venkatesan, G. S. S. Vinay et al. (7 authors)
AIP conference proceedings
Open Access
Published: Jan 2021
922 days before retraction
Quick Stats
Total Citations:
23
Years Since Retraction:
2.4 years
Open Access:
Yes
Last Checked:
Jul 24, 2025