Retraction
Improvement on Mechanical Properties of Submerged Friction Stir Joining of Dissimilar Tailor Welded Aluminum Blanks
Paper Information
Record ID:
52701
Author(s):
Journal:
Publication Date:
July 28, 2021
Retraction Date:
December 29, 2023
(1.9 year years ago)
Subjects:
Institutions:
- School of Mechanical Engineering, Vellore Institute of Technology, Chennai 600127, Tamil Nadu, India
- Department of Mechanical Engineering, Saveetha School of Engineering, SIMATS, Chennai 602105, Tamil Nadu, India
- Department of Mechanical Engineering, Velammal Institute of Technology, Chennai 601204, Tamil Nadu, India
- Department of Mechanical Engineering, Aditya College of Engineering, Surampalem 533437, Andhra Pradesh, India
- Department of Biotechnology, College of Biological and Chemical Engineering, Addis Ababa Science and Technology University, Addis Ababa, Ethiopia
Countries:
Article Type:
Publisher:
Hindawi
Open Access:
Yes
DOI:
PubMed ID:
Not indexed in PubMed
Retraction PubMed ID:
Not indexed in PubMed
Retraction Details
Citations (73)
73
Total Citations14
Post-Retraction(19.2%)
58
Pre-Retraction1
Same DayPost-Retraction Citation Analysis
6
Within 30 days
13
Within 1 year
0
After 2+ years
400
Days since retraction (latest)
Eco-friendly alternatives to printed circuit boards: developing natural fiber polymer composites with optimized flammability and moisture resistance
T. Sathish, Jayant Giri, R. Saravanan et al. (4 authors)
Journal of Materials Science Materials in Electronics
Published: Feb 2025
4 citations
4 citations
400 days after retraction
Failure evaluation on tailor made aerospace aluminum alloys via underwater friction stir welding employing predictive machine learning technologies.
A S, Gokul Kumar
Engineering Research Express
Published: Jul 2024
196 days after retraction
Efficient Design and Optimization of High-Speed Electronic System Interconnects Using Machine Learning Applications
A. Saravanan, S. Bathrinath, Hari Banda et al. (6 authors)
Advances in systems analysis, software engineering, and high performance computing book series
Published: Jun 2024
182 days after retraction
Lightning Impact Current Variables in Wearable and Implantable Devices on Different Evaluation Methods
L. Natrayan, M. Saravanan, V. Paranthaman et al. (4 authors)
Advances in chemical and materials engineering book series
Published: May 2024
154 days after retraction
Enhancing Wearable Device Transmission on Reactive Power Management Using Linearized AC Models
A. Krishnakumari, M. Saravanan, S. Socrates et al. (4 authors)
Advances in chemical and materials engineering book series
Published: May 2024
154 days after retraction
Synchronous Reconfiguration in Implantable Distributed Generation on Optimal Power Arrangement
Mohammed Ali H., A. Krishnakumari, S. Selvakanmani et al. (4 authors)
Advances in chemical and materials engineering book series
Published: May 2024
154 days after retraction
Analyzing Renewable Power Integration in Edible Devices on Variable Rate Pumped Storage
S. Kaliappan, A. Krishnakumari, M. Shanmugapriya et al. (4 authors)
Advances in chemical and materials engineering book series
Published: May 2024
154 days after retraction
Maximizing machinability at AA8014 joints by hybrid reinforcement in friction stir processing
T. Sathish, Pratibha Choudhary, M. Arun Pandian et al. (7 authors)
International Journal on Interactive Design and Manufacturing (IJIDeM)
Published: Feb 2024
1 citation
1 citation
45 days after retraction
Experimental Insights and ANN-Based Surface Roughness Prediction through analysis of Machined Surface Quality of Al2024/SiCp Composites
Mohammed Saleh Al Ansari, A. Krishnakumari, M. Saravanan et al. (6 authors)
E3S Web of Conferences
Open Access
Published: Jan 2024
3 days after retraction
Enrichment of flexural strength of epoxy matrix nanocomposites reinforced with novel bi-directional woven morus alba/nano clay particles fabricated by hand layup method
Pushpander Kumar, L. Natrayan
AIP conference proceedings
Open Access
Published: Jan 2024
3 days after retraction
Optimizing Mechanical Properties of Magnesium Matrix Composites via Stir Casting for Automobile Applications
M Arangarajan, S. Kaliappan, P. Jayaraman et al. (6 authors)
E3S Web of Conferences
Open Access
Published: Jan 2024
3 days after retraction
Optimizing Surface Roughness in Turning of Al7072 with nano particles of Carbon Metal Matrix Composite using Taguchi Analysis and ANN Prediction
Mohammed Saleh Al Ansari, S. Kaliappan, P. Bhargavi et al. (6 authors)
E3S Web of Conferences
Open Access
Published: Jan 2024
3 days after retraction
Optimizing Aluminum Metal Matrix Composites with SiC Nanoparticles using Taguchi-ANN Approach for Enhanced Mechanical Performance
Mohammed Saleh Al Ansari, K.M.B. Karthikeyan, S. Kaliappan et al. (6 authors)
E3S Web of Conferences
Open Access
Published: Jan 2024
3 days after retraction
Estimation of Machining Performance in Wire EDM of Aluminum Silicon Nitride Composite an Experimental Analysis and ANN Modeling
Mohammed Saleh Al Ansari, S. Kaliappan, G. Bharath Reddy et al. (6 authors)
E3S Web of Conferences
Open Access
Published: Jan 2024
3 days after retraction
Retracted: Improvement on Mechanical Properties of Submerged Friction Stir Joining of Dissimilar Tailor Welded Aluminum Blanks
Advances in Materials Science and Engineering
Advances in Materials Science and Engineering
Open Access
Published: Dec 2023
Same day as retraction
Optimizing the selection of natural fibre reinforcement and polymer matrix for plastic composite using LS-SVM technique
T. Sathish, M.L. Meena, Yagya Dutta Dwivedi et al. (9 authors)
Chemosphere
Published: Dec 2023
8 citations
8 citations
11 days before retraction
Energy and production analysis of a dairy milk factory: A case of study
Oznur Oztuna Taner
Journal of Thermal Engineering
Open Access
Published: Oct 2023
5 citations
5 citations
87 days before retraction
Finger millet husk ash Si3N4 as an alternative mold material for green sand mold casting of AA7075 alloys: an optimization study
Natrayan, Balaji Navaneethakrishnan
Biomass Conversion and Biorefinery
Published: Sep 2023
1 citation
1 citation
112 days before retraction
Machining and mechanical characterization of friction stir processed (FSP) surface hybrid composites (AA8014 + TiB2 + ZrO2)
T. Sathish, A. Sagai Francis Britto, Vinjamuri Sree Naga Chidambara Dattu et al. (6 authors)
The International Journal of Advanced Manufacturing Technology
Published: Aug 2023
16 citations
16 citations
125 days before retraction
Waste bull bone based reusable and biodegradable heterogeneous catalyst for alternate fuel production from WCO, and investigation of its usability as fuel substitute
R. Saravanan, T. Sathish, Ümit Ağbulut et al. (7 authors)
Fuel
Open Access
Published: Aug 2023
11 citations
11 citations
134 days before retraction
A novel technique implementation to fabricate and analysis of AZ91D with TiN through FSP
Thanikodi Sathish, K. Logesh, V. Mohanavel et al. (6 authors)
The International Journal of Advanced Manufacturing Technology
Published: Jul 2023
136 citations
136 citations
151 days before retraction
Investigation on Role and Impact of 3D Printing Technology in Sand Casting
P.K. Dhal, P. V. Arul Kumar, G. Muthu et al. (6 authors)
Applied Mechanics and Materials
Published: Mar 2023
301 days before retraction
Design and Development of a Smart Sprinkler Device for IoT-Integrated Plants Irrigation
R. Josphineleela, Kotla Venkata Siva Reddy, M. V. S. Sreekanth Reddy et al. (4 authors)
Unknown Journal
Published: Mar 2023
6 citations
6 citations
302 days before retraction
Effect of process parameters on AA6061 by friction stir welding
D. Raguraman, S. Harish Kiran, K. A. Muthukumaran et al. (5 authors)
Materials Today Proceedings
Published: Mar 2023
303 days before retraction
Intelligent Virtual Laboratory Development and Implementation using the RASA Framework
R. Josphineleela, S. Kaliappan, L. Natrayan et al. (4 authors)
2022 6th International Conference on Computing Methodologies and Communication (ICCMC)
Published: Feb 2023
40 citations
40 citations
309 days before retraction
Determinants of dielectric behaviour of MO8+ substituted LiFe5O8
S. Kaliappan, Chandrashekhar K. Pati, M. Karthick et al. (6 authors)
AIP conference proceedings
Published: Jan 2023
362 days before retraction
A study on methylene blue photocatalytic activity in the presence of different shape lead (II) sulphide nanoparticles
S. Kaliappan, Chandrashekhar K. Pati, M. D. Raj Kamal et al. (6 authors)
AIP conference proceedings
Published: Jan 2023
362 days before retraction
Improvement of impact strength of epoxy matrix nano composite reinforced with bi-directional woven morus alba with silicon nanoparticles fabricated by hand layup method
G. Shiva Kumar, L. Natrayan
AIP conference proceedings
Published: Jan 2023
362 days before retraction
Influence of process parameters on machining studies on stir casted MMCs with AA6351 and TiO2 by grey and desirability approaches
Suja Sundram, Manju Shree Raman, S. Balamuralitharan
Materials Today Proceedings
Published: Jan 2023
7 citations
7 citations
362 days before retraction
A study on mechanical properties of heat treated Fe-Ag-Al alloys
S. Kaliappan, K. Muralidharan, M. Natarajan et al. (6 authors)
AIP conference proceedings
Published: Jan 2023
362 days before retraction
Comparative study on optimum moisture content and maximum dry density of sandy clay soil with basalt reinforced sandy clay soil
R. Aishwarya, P. Priya Rachel
Materials Today Proceedings
Published: Jan 2023
1 citation
1 citation
362 days before retraction
Comparative study on Atterberg limits of soil and basalt fiber composite as an eco-friendly construction material
R. Aishwarya, P. Priya Rachel
Materials Today Proceedings
Published: Jan 2023
8 citations
8 citations
362 days before retraction
Effect of tool rotation speed on mechanical properties of underwater friction stir welding of 6061-T6 and 5083-H12 aluminium alloys
Nishant Nishant, Sanjay Kumar Jha, Prashant Prakash
Materials Today Proceedings
Published: Jan 2023
2 citations
2 citations
362 days before retraction
Comparative study of compressive strength of novel steel fiber reinforced geopolymer concrete and conventional concrete
P. Chakradhar Reddy, R Ganesan
Materials Today Proceedings
Published: Dec 2022
6 citations
6 citations
385 days before retraction
Compressive strength of novel polymer coated concrete with polypropylene fiber
Dasam Kanishka, G.B. Ramesh Kumar
Materials Today Proceedings
Published: Nov 2022
3 citations
3 citations
403 days before retraction
Comparison of material removal rate of AA2014 aluminum alloy using HSS M42 and Titanium Nitride coated drill tools
D. Guna, D. Vinodh
Materials Today Proceedings
Published: Nov 2022
4 citations
4 citations
413 days before retraction
A Recent Trend on Additive Manufacturing Sustainability with Supply Chain Management Concept, Multicriteria Decision Making Techniques
S. Raja, S. Kaliappan, P. V. Arul Kumar et al. (7 authors)
Advances in Materials Science and Engineering
Open Access
Published: Aug 2022
34 citations
34 citations
503 days before retraction
Effect of Nano Ground Granulated Blast Furnace Slag (GGBS) Volume % on Mechanical Behaviour of High‐Performance Sustainable Concrete
Seelam Srikanth, Chunchu Bala Rama Krishna, T. Srikanth et al. (7 authors)
Journal of Nanomaterials
Open Access
Published: Jan 2022
11 citations
11 citations
727 days before retraction
Evolution and Recent Scenario of Nanotechnology in Agriculture and Food Industries
M. Vijayakumar, G. J. Surendhar, L. Natrayan et al. (6 authors)
Journal of Nanomaterials
Open Access
Published: Jan 2022
74 citations
74 citations
727 days before retraction
Multiresponse Optimization of Mechanical and Physical Adsorption Properties of Activated Natural Fibers Hybrid Composites
G. Velmurugan, V. Siva Shankar, L. Natrayan et al. (7 authors)
Adsorption Science & Technology
Open Access
Published: Jan 2022
41 citations
41 citations
727 days before retraction
Synthesis and Analysis of Impregnation on Activated Carbon in Multiwalled Carbon Nanotube for Cu Adsorption from Wastewater
L. Natrayan, P. V. Arul Kumar, Joshuva Arockia Dhanraj et al. (8 authors)
Bioinorganic Chemistry and Applications
Open Access
Published: Jan 2022
38 citations
38 citations
727 days before retraction
Mechanical and Wear Behaviour of Nano‐Fly Ash Particle‐Reinforced Mg Metal Matrix Composites Fabricated by Stir Casting Technique
M.S. Santhosh, L. Natrayan, S. Kaliappan et al. (8 authors)
Journal of Nanomaterials
Open Access
Published: Jan 2022
28 citations
28 citations
727 days before retraction
Processing and Characterization of Novel Bio-Waste Hybrid Brick Composites for Pollution Control
Naresh Kumar, Piyush Gaur, S. Kaliappan et al. (7 authors)
Bioinorganic Chemistry and Applications
Open Access
Published: Jan 2022
27 citations
27 citations
727 days before retraction
Development of Novel Bio-mulberry-Reinforced Polyacrylonitrile (PAN) Fibre Organic Brake Friction Composite Materials
Naresh Kumar, L. Natrayan, G. Kasirajan et al. (7 authors)
Bioinorganic Chemistry and Applications
Open Access
Published: Jan 2022
25 citations
25 citations
727 days before retraction
Improvement of impact strength of novel intra-ply basalt/kevlar composite by addition of silica nanoparticles in comparison with basalt/kevlar composite using resin transfer mould process
Pravin Kumar, B. Navin Kumar
Materials Today Proceedings
Published: Jan 2022
12 citations
12 citations
727 days before retraction
Analysis of engine mount material for automotive vibration and noise reduction
S.M. Aathif Akmal, G. Bharathiraja
Materials Today Proceedings
Published: Jan 2022
10 citations
10 citations
727 days before retraction
Compression and impact investigation of GFRP epoxy with novel hybrid Banana-Prosopis Juliflora GFRP composite
A.K. Prasad, L. Natrayan
Materials Today Proceedings
Published: Jan 2022
5 citations
5 citations
727 days before retraction
Surface integrity in drilling AA5052 + 3 %MoS2 + 9 %Si3N4 HAMMC and comparing the results with AA5052 + 9 %Si3N4 AMMC - experimental studies and optimization
Neppala Gowtham, N. Senthilkumar
Materials Today Proceedings
Published: Jan 2022
4 citations
4 citations
727 days before retraction
Comparison of HSS M35 and titanium-nitride coated tool in novel CNC drilling operation of aluminium alloy AA6351-T6 material on surface roughness
Rednam Veera Venkata Satya Sai Krishna, Mohammed Ajmal Sheriff F
Materials Today Proceedings
Published: Jan 2022
4 citations
4 citations
727 days before retraction
Comparison of novel TiN coated and uncoated carbide tool in CNC dry turning of EN31 to analyse chip profile
S. Jagadeesan, G. Ramya Devi
Materials Today Proceedings
Published: Jan 2022
4 citations
4 citations
727 days before retraction
Quick Stats
Total Citations:
73
Years Since Retraction:
1.9 year
Open Access:
Yes
Last Checked:
Jul 24, 2025